Making Guinness Beer Soap - A Recipe For Beginners

Making Guinness Beer Soap - A Recipe For Beginners

Table Of Contents

1. What You’ll Need
2. Instructions
   1. Step 1: Prepare the Oils
   2. Step 2: Prepare the Lye Solution
   3. Step 3: Combine the Oils and Lye Solution
   4. Step 4: Pour the Soap into the Molds
   5. Step 5: Unmold the Soap
3. Conclusion

Do you want to try making your own soap? If so, why not give Guinness beer soap a try? Not only does it make a lovely soap, but it also smells delicious. In this article, we’ll show you a simple recipe for making Guinness beer soap using natural ingredients. Read on to find out how you can make your own soap with a unique, rich beer scent.

What You’ll Need

Before you start making your soap, you need to make sure you have the right ingredients and tools. Here’s what you’ll need to make your Guinness beer soap:

• 14oz of coconut oil
• 7oz of shea butter
• 7oz of olive oil
• 14oz of Guinness beer
• 8.4oz of lye
• A digital scale
• A thermometer
• Soap molds
• A stainless steel pot
• Safety glasses and gloves
• Vinegar (for cleaning up spills)

Instructions

Making your own beer soap is a fun process and not as difficult as you might think. Follow these instructions to make your own Guinness beer soap:

Step 1: Prepare the Oils

The first step to making your soap is to prepare the oils. Grab your digital scale and measure out the coconut oil, shea butter, and olive oil in the proportions mentioned above. Put them in the stainless steel pot and place it on the stove over a low heat. Once all of the oils have melted, remove the pot from the heat and let it cool to around 115 degrees Fahrenheit.

Step 2: Prepare the Lye Solution

Once the oils have cooled, it’s time to prepare the lye solution. Put on your safety glasses and gloves and carefully measure out 8.4oz of lye using the digital scale. Pour the lye into a container and slowly add the Guinness beer. Stir the mixture until all of the lye has dissolved. Let the solution cool to the same temperature as the oils.

Step 3: Combine the Oils and Lye Solution

Now that you have both the oils and the lye solution at the same temperature, it’s time to combine them. Slowly pour the lye solution into the pot with the oils while stirring constantly. Keep stirring until the mixture reaches a thick, pudding-like consistency. This may take up to 20 minutes.

Step 4: Pour the Soap into the Molds

Once the mixture has reached the desired consistency, it’s time to pour it into the soap molds. Make sure that the molds are lined with parchment paper to prevent the soap from sticking. When the molds are filled, cover them with plastic wrap and let them sit for 24 hours.

Step 5: Unmold the Soap

After 24 hours, the soap should be ready to unmold. Carefully remove the soap from the molds and cut it into bars. Place the bars on a drying rack and let them cure for 4-6 weeks. Once the soap is fully cured, it’s ready to be used!

Conclusion

Making Guinness beer soap is a fun and rewarding experience. With a few simple ingredients and a bit of patience, you can make your own unique soap with a delicious beer scent. So why not give it a try? You’ll be glad you did!